Changelog
New features and improvements in Code F CRM.
Sent emails kept longer
Order confirmations and other transactional emails now keep their full content for a year, so you can see exactly what a customer received.
- Improved
Order confirmations, receipts and other transactional emails keep their full content for 12 months instead of 30 days. Set it between 1 and 24 months under Settings → Team → Sent email content.
- Improved
An email you send to one person by hand keeps its content as long as the contact exists. Marketing emails still keep theirs for 7 days.
- Improved
A text message is never sent twice when the SMS provider doesn’t answer clearly (a timeout, a dropped connection or a provider error). It may already be on the phone, so it is marked as uncertain, like an email in the same situation, and not tried again. Only a text that provably never reached the provider is retried. If the provider stops answering, a campaign now pauses itself.
- New
Webhooks and automation webhook steps carry an X-Crm-Delivery-Id header. It stays the same when a delivery is retried, so your endpoint can skip a request it has already handled.
- Improved
A restart of the CRM no longer cuts a campaign, automation or webhook batch off in the middle: the message in progress is finished and the rest continues right after.
- Improved
Every email and text message is recorded before it goes to the provider, so none is ever lost or sent twice. One that may have arrived but got no clear answer shows as “May have arrived” in its contact’s history and in the failed actions. It is never sent again by itself, and you can resend it one at a time if the person says it didn’t arrive.
- Improved
An automation that is interrupted (a restart, a lost connection) carries on where it was without repeating a step: an email, text or webhook it had already sent is never sent again, and one it hadn’t sent yet still goes out.
- Improved
Birthday and date automations no longer miss a day when the CRM was briefly down: a day that was missed is caught up (at most one day late), and nobody gets the same date message twice. A birthday on 29 February now comes on the 28th in other years.
- Improved
When an API key goes over its requests per minute, the 429 answer now carries a Retry-After header with the seconds until the next minute starts.
- Improved
Double opt-in: opening the confirmation link shows a button to confirm, so a mail scanner that opens every link no longer subscribes anyone, and an old link can’t subscribe someone who unsubscribed since. Someone already subscribed who signs up again on a double opt-in form stays subscribed.
- Improved
A click on a link counts even when a mail security filter opened the same link first. Each unsubscribe now counts for the last marketing email the person got, not for every campaign they had received.
- Improved
“Send again” on a campaign recipient whose email may have arrived now sends it once. Resending a failed email sends the same email again: for the same order or record, from the same sender, in the same language.
- Improved
Segments that use another segment, bounces or a deleted tag update right away. Multi-choice conditions match whole options (“Men” no longer matches “Women”), and date triggers on date-and-time fields start on the right day.
- Improved
CSV files carry money (“199 SEK”), multi-choice values (“Ski; Hike”) and yes/no values both ways, so an export can be imported again. Amounts in Danish, Norwegian, German and French emails are written the way those languages write them.
- Improved
The campaign form never sends right away when “Send later” has no date, and a failed schedule no longer leaves an extra draft behind. When your sign-in expires, the CRM asks you to sign in again and brings you back to the same page.
Roles and permissions
Give each person the role that fits their work instead of making everyone an admin, and give API keys exactly the access they need.
- New
Five roles: Admin, Marketer, Seller, Viewer and Developer. Each person sees the menus and settings their role covers, and buttons they can’t use say why.
- New
Change someone’s role under Settings → Team. They are signed out and their next sign-in has the new permissions. An organisation always keeps at least one admin.
- New
API keys pick from 28 scopes in four groups, with ready-made starting points such as “Read only” and “Sync integration”. A key can only get scopes the person creating it has.
- Improved
Sending a campaign, exporting data and sending a single text message are now permissions of their own, so a role can draft campaigns without sending them.
- Improved
Website tracking keeps events in the visitor’s browser when the CRM can’t take them for a moment, and sends them once it can, so a short restart no longer loses visits or carts. Each event is stored once, however often it is sent.
- Improved
Website tracking handles much more traffic at once: busy shops are no longer cut off at a fixed number of requests a minute.
- Improved
Segments of orders, companies or your own objects open in the segment editor with their own fields, live count and members, and the editor shows which records a segment is about. A new segment can be made on any object. Every place you pick a segment offers only the kind that fits: campaigns take segments of contacts, an automation’s goal takes segments of the records in it.
- Improved
Website tracking keeps every waiting event when a visitor accepts cookies and leaves the page right away. A page sends at most 30 requests a minute, even when a site sends events in a loop, and sends nothing twice when the visitor switches tabs.
- Improved
On the Followups page, a follow-up you open to edit stays open while a new search loads.
Automations that tell your team and keep the work moving
New automation steps email someone on the team, create follow-ups, move records into flows and stop other automations, and every step now comes with examples.
- New
The “Email a person” step tells someone on the team, or any address, about a record, with a link to open it in the CRM. Replies go to the person the record is about. It never counts as marketing.
- New
The “Create follow-up” step makes a task with fields from the record and from what started the automation in its title, due today or in hours, days or working days, for someone on the team.
- New
The “Add to flow” step puts a record into a flow at the stage you pick, and can move a record that is already in it.
- New
The “Exit other automations” step stops other automations for a record, for example cart reminders once the order is paid. The runs list shows which automation stopped them.
- New
The “Branch by value” step sends records different ways by a field’s value, such as their tier or city, with a branch for everything else.
- New
The “Create record” step makes a record of any kind, such as a ticket or a booking, from the record, a linked record or the event that started the automation, linked to it. If one already exists, it can update that one instead.
- New
Every automation step has examples: what it does, ways to use it and a small automation that shows it in place.
- New
Webhooks are easier to set up: Settings → Webhooks explains each event with an example, every endpoint has “Send a test”, and the “Call webhook” step can send the record’s fields, related records and the starting event, with your own headers, signed so the receiver can check it came from you.
- New
Bot protection has its own tab in Settings. Your Cloudflare Turnstile keys are checked before they are saved, and Test shows the check right there.
- Improved
Embedded forms are easier to style from your own site: CSS variables, fixed class names, a dark theme, and answers filled in from the page address. See “Style your form” in the docs.
- Improved
A switched-off form now shows its message where it is embedded instead of leaving a gap.
- Improved
A step can be deleted from an automation that is switched on, and search (Ctrl+K) finds places inside pages, such as Media or the Test outbox.
- Improved
Clicking a step in the list never adds it after an End step, and the review warns about steps that no record can reach.
- Improved
The guide to setting up website tracking on a Viskan shop now covers Streamline 3 as well as Streamline 4. The Market’s website tracking notes, Settings → Website tracking and the Viskan connection link to it.
- Improved
Connecting Viskan shows how to create the API client step by step: a link to Viskan Backoffice, the switches to turn on in Backoffice’s own words, and the scope list to check against. If a scope is missing, Test connection names it.
- Improved
Test connection shows its answer where you can see it, and the dialog’s buttons no longer sit against the bottom edge. Right after connecting, the card says the first sync is starting.
- Improved
Signing in to the MCP server with an account that isn’t in any organisation now says so, instead of a general sign-in error.
- Improved
Website tracking knows who bought from the order: a purchase by a visitor who wasn’t identified is matched by its order or purchase number to the orders in the CRM, and the visitor’s browsing goes to that customer’s timeline. Orders that arrive later are matched too.
- Improved
The timeline filters look through the whole history, so “Load more” brings older entries of that kind. A record opens on “All except web”, and the new “Web” filter shows the website’s visits.
- Improved
Live events under Settings → Website tracking can be filtered by event, by known or anonymous visitors, and by email or page. Pause the list to read it, and new hits ease in instead of jumping.
- Improved
A full web address pasted into Allowed domains becomes its domain right away, and something that isn’t a web address is refused with a reason.
- Improved
Abandoned cart and “viewed but didn’t buy” events show the product’s picture and link also when your website identifies items by another id than the SKU, for example the PLU or the product number.
- Improved
In test mode, a link clicked in an email in the Test outbox still identifies you on your own website, so you can try the whole email, shop and cart reminder loop before going live.
Send a campaign from an automation
An automation can now send a campaign to a segment or a tag, for example when a new blog post or product is marked ready.
- New
The “Send campaign” step sends a marketing email to everyone in a segment or with a tag, once each time a record reaches it. It works on any kind of record, with consent, sending limits and stats as for any campaign.
- New
Record cards in an email can show “This one”: the record that started the automation, such as the post the campaign is about.
- Improved
Switching on an automation that sends campaigns first says who will get them and how many people that is today.
Abandoned carts and ready-made flows for your shop
Website tracking now notices carts and checkouts that weren’t finished, and the Market has a collection made for your shop platform.
- New
Abandoned cart, abandoned checkout and “viewed but didn’t buy” events for identified visitors, with the products, their images and links. Set how long a cart may wait, and your cart page, under Settings → Website tracking.
- Improved
Website tracking waits for the visitor’s cookie answer, and ties visits to a person only with marketing consent. It reads Cookiebot and Cookie Information as well as Google Consent Mode.
- New
Market collections: with a Viskan shop connected, the Market opens on “Made for your Viskan shop”, with welcome, review request, win-back, subscription reminder and order emails, and segments such as VIP customers and frequent returners.
- New
Segments can add up a field of related records, for example the total spent minus refunds. Automations can start on a date field, or a number of days before or after it.
- Improved
Integrations have a Renew CRM key button at all times, so a connection picks up the fields and events of a newer integration version without waiting for a problem.
- Improved
While a first sync or a full check runs, the integration shows how much of your shop’s data is in and about how long is left, and what waits for what. Otherwise it shows when each kind of data was last read in full, and when it is read next.
- Improved
“What’s synced” has a tab per kind of data, with people and companies apart.
- Improved
In record lists, a long value no longer squeezes the other columns: it shows its start, and the whole text when you point at it.
- Improved
A group of conditions set to “none of these” now leaves those people out. Before, a group sent with "negate" through the API matched them instead. A group can now be set to “none” in the segment editor.
- Improved
The assistant answers much faster: most requests now take seconds instead of minutes.
- Improved
Save and Cancel stay at the bottom of every dialog while you scroll. Closing a dialog or leaving a page with unsaved changes now asks before anything is lost.
- Improved
A contact’s timeline says when they opened an email or clicked a link in it, which email it was and where the link went.
Company customers and a fuller Viskan sync
Orders can belong to a company, and the Viskan integration brings in companies, subscriptions, returns and refunds, with a status that says what to do.
- New
An order can belong to a person, a company or both. Order messages for a company’s order go to its contact person, or to the company’s own email when there is none (Settings → Email → Company orders). Marketing never goes to a company.
- New
People can be a company’s contact person. The automation log shows who each message went to and why.
- New
The Viskan integration syncs company customers with their people, subscriptions with their monthly value, returns, refunds and product images, and sends events for them (for example Subscription cancelled, Return completed, Order refunded).
- Improved
The integration status groups what wasn’t synced by reason, splits what needs action from what is only information, uses your shop’s own order and customer numbers, and lets you download every item as CSV.
- New
Customers Viskan combines as duplicates become one contact, and a customer erased in Viskan is erased in the CRM too. Their orders stay, without the personal details.
- New
The Viskan connect form has the shop’s brand, price list, root category and colour/size attributes, how many customers may share one email before they’re kept apart, and an option to send unsubscribes back to Viskan.
Easier forms, filters and search
The form editor shows the preview beside your settings, filters on events understand their answers, and Ctrl+K finds settings.
- Improved
The form editor is wider, with the live preview next to the settings. Long text blocks wrap instead of stretching the window, and the formatting help lists one format per line.
- Improved
Forms mark every required question and field with a red star, and an error goes away as soon as the question is answered. A question with a limit says “Choose 1–2.” when nothing is picked.
- Improved
After someone signs up, the form shows a clear thank-you with a check mark. Its text is now under Settings → Pages and emails to contacts, in each language.
- New
A double opt-in form can word its own confirmation email, so a one-off event doesn’t change the email for every other form.
- Improved
Deleting a form offers to switch it off instead, or to download its results first. The forms list shows active forms by default, with switched-off ones one click away.
- Improved
Event filters list events by name, grouped (Forms, Email, …). Their details sit on their own lines and use the answer options, numbers and dates of each question.
- Improved
Rows in lists are real links: middle-click or Ctrl+click opens a record in a new tab. The menu keeps a pinned object highlighted on its records, and the browser’s Back button returns to the tab or event you had open.
- New
Ctrl+K finds settings, both tabs and the cards inside them, for example “unsubscribe” or “DKIM”.
- New
The form editor’s preview also shows what comes after the form: the thank-you, and with double opt-in the confirmation email and the confirmed page, with your own texts.
- Improved
Dialogs keep to the width of your window: long texts wrap instead of pushing the content out of view.
- New
Images in emails can be set to full width: they fill their column and follow when you change the padding or the columns. New images start at full width.
- Improved
The dark and light social icons in emails now look the same in Gmail’s dark mode on Android, where some of them used to flip colour and others not.
Richer forms
Forms can show information between their questions, a banner image across the top, and limits on how many options to tick.
- New
Text blocks on forms and surveys: headings, paragraphs, bold text, bullet lists, links and dividers, for a schedule, terms or any other information.
- New
Put text, fields and questions in any order, so information can sit above, between or below them.
- New
A banner image from your image library across the top of a form. On the form’s own page it is also the picture shown when the link is shared.
- New
Set the fewest and the most options a person can tick on a question or field with several choices, for example “choose 1–2”.
Faster imports and syncs
Large imports, API batches and connected shops now save records many times faster, and the app reads more plainly.
- Improved
Batch writes through the API, CSV imports and integrations save records about ten times faster in organisations with many segments.
- Improved
Sending the same batch twice at the same time, for example when a network call is retried, no longer creates duplicates or fails with a conflict.
- Improved
A record without a name shows its phone number or customer number as its title, or “No name”, instead of an internal id.
- Improved
Texts across the app were rewritten in shorter, plainer sentences.
- Improved
A sign-up form field that holds several choices now shows one tick box per option and saves what was ticked. Before, signing up through such a field failed.
- Improved
Dark mode is easier to read: text fields, checkboxes, switches and borders stand out clearly from the page.
- Improved
List filters only offer conditions that fit the field. Date fields keep "in the last" and "more than … ago", now with a number and a unit such as days or months.
- New
Find record (Ctrl+Shift+F, or Find in the header) searches all your records. Ctrl+K now only goes to pages, so pressing Enter always opens what you see. In Find record, Enter waits for the results of what you typed instead of opening an earlier match.
- New
Settings → Integrations has a “What’s synced” view for Viskan: every field it fills and where the value comes from, the events it sends, and what it doesn’t sync. It opens from the Viskan card, the connect form and a connected integration.
Connect your Viskan shop
A ready-made integration: customers with their marketing consent, orders, shipments and products come in by themselves, every few minutes.
- New
Settings → Integrations connects a Viskan shop with its API client: test the connection, see what will be added to your data model, connect. Customers, orders with their lines, shipments and products then stay in step with the shop.
- New
The first sync brings in your history without starting any automations. Orders and shipments that happen after you connect send “Order placed” and “Order shipped” events, which the ready-made “Order shipped” automation picks up.
- New
Marketing consent given in the shop (for example at checkout) is recorded in the consent history as “Given in a connected system”. A person’s own unsubscribe in the CRM always wins over the shop.
- New
See how each sync is doing, which records the CRM refused and why, and pause, resume or disconnect at any time. Disconnecting keeps everything already synced.
- New
A new API key permission, “consent:write”, records marketing consent without being able to send anything. Useful for your own integrations too.
The CRM is now called Code F CRM
A new name for the product, with a rewritten product page and developer docs. Your address, sign-in, API keys and integrations stay the same.
- Improved
The product is now called Code F CRM, and the company behind it Code F. It is still at crm.codefab.dev, and API keys, webhooks and connected AI apps keep working as before.
- Improved
A new logo with the CF mark, in the app, on the sign-in page and in link previews.
- Improved
The product page, in English and Swedish, and the developer docs were rewritten in shorter, plainer language.
- Improved
System emails and the Google Tag Manager template use the new name. A tag you already imported keeps working; import the template again to see the new name.
- Improved
Reopen a chat with the assistant while it is still answering and you now see that it is working, with a Stop button; the answer appears as soon as it is ready.
Analyse your CRM data in AI Insights
Connect AI Insights with one key and ask questions about your contacts, orders, campaigns and messages in plain language.
- New
Settings → AI Insights: create a key, paste it into AI Insights (add a data source, choose Code F CRM) and ask away. Answers become charts, dashboards and reports, and can combine your CRM data with your other databases.
- New
AI Insights sees one table per object (contacts, companies, orders, your own objects), the links between them, and your activity: timeline, campaigns, emails and texts with opens, clicks and bounces, tags, segments and consent. The tables follow new fields and objects by themselves.
- New
The key can only read, and only your organisation’s data; message contents, passwords and settings are not included. Create a new key or disconnect at any time, and the old key stops working at once.
- Improved
A mistyped or old link on your own link domain shows the page-not-found page instead of an empty error.
- New
Settings → Brand: write your own text next to the consent checkbox on your forms, and what your sign-up forms say once someone has signed up (for example “check your inbox and confirm”). Every form without its own text uses yours, the ready-made Market forms included.
- New
When a sign-up form asks people to confirm their email address but no email provider is set up, Settings → Email and the forms page now say so clearly: nobody gets the confirmation email until one is. The people whose confirmation email didn’t go out are listed with the reason, and you can send it again.
- Improved
Settings → Email shows the sender your email goes out as, and with Amazon SES you can change the sender without entering your access keys again. Saving the form no longer disconnects the bounce and complaint reports.
- Improved
Long bounce reasons take three lines in a campaign’s recipients (the full text on hover).
- Improved
Link previews made by Google’s apps (such as Messages on Android) no longer count as clicks on your tracked links.
Bounces you can act on, and tracked links in texts
See why an email bounced and find the bad addresses, set when a campaign pauses itself, and see who clicked the links in your texts.
- New
See why an email bounced, in the receiving server’s own words (for example “550 5.1.1 user unknown”): in a campaign’s Recipients (show Bounced), on the contact’s timeline and on the suppression list. Temporary bounces, such as a full mailbox, are shown apart and don’t block the address.
- New
“Has bounced” finds everyone whose current address bounced, in the contact list and in segments: for good or temporarily, any time or in the last days. Fix a typo and they drop out.
- New
Set your own bounce limit in Settings → Email: a campaign pauses itself when more than this share bounces (default 10%, between 5% and 20%), judged once 50 have gone out. The campaign page shows the bounce rate while it sends, and warns from half the limit.
- New
Links in marketing texts are tracked: they go out as short links on your own link domain, and the campaign shows clicks per link and who clicked. A click reaches the contact’s timeline and automations can wait for it. Previews in chat apps don’t count.
- Improved
Granting email consent to everyone with a tag never gives it back to someone whose consent was withdrawn, whoever withdrew it. The result says how many were left as they are.
- Improved
When a record can’t be saved because of a clash, the message says what really happened instead of a confusing note about an “external id”.
- Improved
Percentages on the campaign page are written the way your language writes them (“6,7 %” in Swedish).
- Improved
Two people starting a new automation at the same moment both get one: the second is named “Untitled automation 2” instead of failing with “already exists”.
Your own domain in every link
The links in your emails and texts can show your own domain instead of crm.codefab.dev.
- New
Set up your own link domain in Settings → Email, for example link.yourshop.com. Add the one DNS record shown, and we do the rest: we find the record, secure the connection and switch your links over by ourselves.
- New
Tracked links, unsubscribe, confirmation, form and SMS opt-out links all use your domain, and people and spam filters trust them more.
- Improved
If your link domain stops working, your links go back to crm.codefab.dev by themselves, so no email ever goes out with broken links.
- Improved
A campaign’s numbers update every few seconds while it sends and in the first hours after, when the opens and clicks come in.
Lost phone? Reset two-factor sign-in, and see the audit log
- New
Admins can reset a team member’s two-factor sign-in in Settings → Team, for someone who lost their phone. The authenticator is removed and they sign in again with their own password and set it up anew. Their password doesn’t change, and they get an email about it.
- New
The audit log has its own screen in Settings → Team: who did what and when, with filters, search, dates and a CSV download. It also shows changes Code FAB makes to your organisation on your behalf.
- Improved
When a record can’t be saved, the message says which field and what’s wrong, in your language, and the field is marked.
- Improved
Country fields are a searchable list of countries, and a country’s name (“Sweden”, “Sverige”) is accepted as well as its code, also in imports and the API.
- Improved
Choosing a record to link to shows its name, and searches all its fields, instead of showing an id.
- Improved
More professional default wording on the unsubscribe and confirmation pages and in the confirmation email.
- Improved
The campaign list opens faster with many campaigns: their numbers come in one go, and only refresh while a campaign is sending.
- Improved
Someone who unsubscribed and later confirms a new subscription themselves gets your emails again. A bounced address or a spam complaint still stays blocked.
- Improved
A new contact or sign-up is never lost when an automation is deleted at the same moment.
- New
Preview a campaign as one of the people it goes to: their language version, with their own name and details in every field. Once it is sent, the preview is the copy they actually got.
- New
Before you send, Recipients shows who gets the campaign, and for everyone else why not: no consent, unsubscribed or bounced, no address or no version in their language.
- Improved
A sent campaign’s list of recipients says why someone was skipped, and its audience segment opens with one click.
Linked records in your lists
- New
Record lists can show a linked record as a column, such as each contact’s company or each order’s customer. Pick it under Settings → Data model → List columns.
- Improved
The Amazon SES check says “1 email a second” instead of “1 emails”.
Your look on every page your contacts see
The unsubscribe and confirmation pages, and the email that asks people to confirm, now look and read like you.
- New
The unsubscribe and SMS opt-out pages, the email asking someone to confirm their subscription and the page that thanks them use your brand colours, font, logo and name, and link back to your website.
- New
Each is shown in the contact’s own language instead of Swedish and English at once.
- New
Change the wording of every heading, text and button in Settings → Brand, per language, with a live preview on desktop and phone.
- New
Archive old campaigns to tidy the list. They keep their results, who got them and what they clicked, and can be brought back any time.
- Improved
The confirmation email ends with your name, postal address and phone number, like your newsletters.
- Improved
A new “Social links” block starts with icons instead of words.
See who got your campaign, and who clicked what
Requests from our customers: who got an email and which button they clicked, simpler filters, and your phone number in every email.
- New
Every campaign lists who it went to and what each person did: opened, clicked, bounced, marked it as spam or unsubscribed. Filter, search and download the list as CSV.
- New
See which link or button each person clicked, and how many people clicked each one, even when several buttons go to the same page. Click a link to see who clicked it.
- New
Search pages filter on “In segment” (or not in it) together with any other filter, and segments can build on other segments.
- New
Email and SMS consent are filters of their own: given, not given, asked but not confirmed, withdrawn. No more typing “granted”.
- New
Your phone number goes at the bottom of every marketing email with your name and postal address, as a number you can tap. Rename your organisation in Settings.
- Improved
If you remove the unsubscribe link from a marketing email, the editor says so and puts it back with one click. It is always added back when you save.
Safer big sends
Everything a campaign to tens of thousands of people needs to protect your sender name and reach the inbox.
- New
Before you send, the campaign checks your From address: your own domain, SPF and DMARC in place, bounce reports connected and your postal address set, with what to fix if something is missing.
- New
A new sending domain warms up by itself: a little more each day, so a big list doesn’t land in spam on day one.
- New
Bounces and spam complaints show on the campaign, and a campaign pauses by itself when too many come back, or when the sending account stops working, instead of failing everyone.
- New
Every marketing email ends with your organisation’s name and postal address, and carries a plain-text version for every mail app.
- New
Grant email consent to everyone with a tag in one go, on the basis you choose. People who opted out themselves are always left out.
- Improved
Opens and clicks are people’s: link scanners and Apple’s privacy proxy are counted apart, so rates, automations and A/B winners follow what people did.
- Improved
Nobody gets the same campaign twice: an email that may already have arrived is never sent again by itself, and “Resend failed” only works on a campaign that is sending or sent.
- Improved
A campaign held by the daily limit carries on in the morning, and says until when. It never sends in the middle of the night.
- Improved
Links with “&” arrive exactly as written, old links keep working, and merge tags that name no field are pointed out before you send.
- Improved
Imports from Excel keep their å, ä and ö, a contact list without an id column is matched on email, and you can keep an import quiet towards your webhooks.
Start automations for everyone already there, and limits you can see
- New
Switching on an automation that starts from a segment or a tag can also start it for everyone already in the segment or carrying the tag, with the count and how many days it takes shown first.
- New
“Got a tag” and “Lost a tag” start automations.
- New
Limits you can see: Home tells you when a limit is near or reached, Settings shows how much of each is used today, a campaign waiting for tomorrow’s limit says so, and automation cards count messages skipped by a person’s message limit.
- New
The AI assistant shows how much of this month’s AI budget is used, with a way to raise it or to work through your own AI app instead.
- Improved
Big starts are spread over the days at your daily limit instead of all starting the next day.
- Improved
The campaign wizard warns against your own sending limit, counting marketing email only, and uses the SMS limit for SMS campaigns.
- Improved
File storage is on the price list: 10 kr per GB a month.
A changelog, and what’s new in the app
- New
This changelog: every release with its new features and improvements, back to the first one.
- New
After an update, a short “What’s new” note in the app shows the highlights, until you close it.
- New
A new price ladder, starting at 199 kr a month for up to 500 contacts, with 2.5 emails per contact included each month.
- New
A Help menu in the app header opens the guides, the API reference, this changelog and the website.
- Improved
AI apps connected to the CRM can see which organisation they work in and what they are allowed to do.
Email sending included in every plan
Your monthly fee now includes email sending, and pricing shows exactly what you pay us and what your provider bills.
- New
Every plan includes a monthly allowance of emails that grows with your contacts. Extra emails cost 10 kr per 1,000.
- New
SMS costs 0.15 kr per message. Delivery is billed by your own provider at its own price, with no markup from us.
- Improved
The Usage page and invoices show how many of your emails were included in your plan.
- Improved
A clearer pricing page: one slider for your contacts, then a short price list.
Bulk follow-ups, field editing and Amazon SES
- New
Amazon SES as an email provider: connect it yourself, test the connection, and set up bounce and complaint reports with one click.
- New
Edit fields in the data model: label, rules and list options, with checks before a field becomes required or unique.
- New
Change a field’s values on many records at once, in the background, with a preview, progress and a stop button.
- New
Choose the columns each list shows, once for the whole organisation.
- Improved
Follow-ups load 50 at a time with real totals per group, search by title, and can be marked done or deleted in bulk.
- Improved
Sending speed per organisation. If a provider asks you to slow down, the email is sent again shortly instead of failing.
- Improved
Every setting on a field explains itself with a tooltip.
Fonts and custom styles in emails
- New
Pick a font for each heading, text and button.
- New
Advanced styling: add your own CSS to any block or section, checked before it is saved.
- Improved
Brand fonts are now ones every device and email client shows the same, with Tahoma and Courier New added.
- Improved
All Swedish texts reviewed for natural wording and one term per concept.
Test mode
Try campaigns, automations and flows for real without a single message reaching anyone.
- New
Test mode: every email, SMS and RCS runs as normal but lands in a test outbox instead of being delivered. Test messages are not billed and don’t count toward your limits.
- New
The test outbox shows each message exactly as it would have gone out: sender, recipient, subject, content and where it came from.
- Improved
The provider checks in Settings still reach your own inbox and phone, so you can finish your setup while test mode is on.
Language versions for email and SMS
- New
Settings → Languages: your organisation’s languages, a default, and which language to fall back to.
- New
Email and SMS templates get a version per language. Each send picks the contact’s language, then the fallbacks, then the default.
- New
Campaigns and automation steps can go to contacts with an exact language match only, with results per language.
- New
Translate with AI drafts a new language version for you to review, keeping fields and links intact.
- Improved
The preview tells you which language version a contact gets, and why.
Duplicate anything, precise email design, sign in from AI apps
- New
Duplicate templates, segments, forms, surveys, flows and campaigns. The copy opens straight away as a draft.
- New
Record or withdraw email consent on a contact, with the legal basis.
- New
Connect Claude.ai or ChatGPT by signing in. Connected apps are listed under Settings → AI tools, where you can revoke them.
- Improved
Email editor: background focal point and zoom, transparency on every colour, button size, exact spacing, free column widths and keyboard shortcuts with 100 steps of undo.
- Improved
The AI assistant asks when a request is unclear, understands relative dates and replies in your language.
Survey templates and one brand for emails and forms
- New
Ready-made surveys in the Market: NPS with follow-ups for promoters and detractors, customer satisfaction, event feedback and product interest.
- New
Settings → Brand: one set of fonts and colours for both emails and forms, with live previews.
- Improved
Search waits until you pause typing, and the current results stay on screen while new ones load.
- Improved
Survey answers read question by question on the contact’s timeline.
Forms and surveys
- New
Forms and surveys with nine question types, a hosted page for each, and a personal link per recipient in your emails.
- New
Answers are saved on the contact, ready for segments, automations and webhooks.
- New
Results with a summary, NPS score, every answer and CSV export.
- New
The AI assistant can build surveys for you.
A full email design studio
- New
Brand styles: your font, colours and button style, applied to every email.
- New
Image library: upload once, use in any email.
- New
Saved sections that stay in sync across all your emails, or detach one to change it on its own.
- New
Record cards: show products or other records in an email, picked by you, from a segment or linked to the recipient.
- New
Content only some recipients see, based on a condition, and blocks shown only on desktop or only on phones.
- New
Version history for every template, with one-click restore.
- New
Checks before you send: links that go nowhere, images without alt text, a missing subject and emails close to Gmail’s size limit.
- Improved
Drag and drop anywhere in the editor, up to four columns, text over background images and built-in social icons.
File attachments
- New
File fields and attachments on every record, with allowed file types and size limits per field.
- Improved
Uploads are checked by their content, and risky files are refused.
- Improved
The timeline names who completed a follow-up or flow step.
- Improved
Simpler pricing: AI, automations, imports and the API are included.
Connect your own AI tools in one click
- New
Settings → AI tools: create a key and copy ready-made setup for Claude Code, Claude Desktop, Cursor or VS Code.
- Improved
The API reference shows the exact fields of every operation.
Built for large sending volumes
- New
Daily sending limits per organisation, separate for marketing and transactional email.
- New
One-click unsubscribe in the inbox for every marketing email.
- New
Consent history on each contact, and an organisation time zone and phone region.
- New
Safe retries in the API: idempotency keys on writes and event ids on events.
- Improved
A campaign never sends twice to the same person, even after an interruption, and a setup problem pauses it with the reason.
- Improved
Imports and back-filled events no longer start automations.
Use the CRM from your own AI app
- New
The CRM is an MCP server: connect an AI client with an API key and work with your organisation from there.
- New
“Starts with” in filters and segments.
- Improved
A compact scope picker for API keys, wider settings pages and 12-hour sessions.
Product catalogue
- New
A product catalogue in the Market, with products linked to order lines by SKU, including a “bought a product over 1,000 kr” segment.
- Improved
Saving a segment shows its member count right away.
Deeper conditions and templates in personal messages
- New
Send an SMS from a contact, and use your templates in personal emails and SMS.
- New
Conditions that follow links several steps (contact → order → order line), plus “has none”, consent and “in the last N days”.
- New
“Create with AI” on segments, automations, flows and campaigns.
- Improved
Installing from the Market ends with a list of what was added, each with a link.
RCS messages
- New
Rich cards, carousels and buttons via Sinch. Phones that can’t show RCS get the message as an SMS.
- New
Marketing RCS messages carry an opt-out button.
SMS marketing
- New
Every marketing SMS ends with a short opt-out link.
- New
Marketing SMS go out between 08:00 and 20:00, and are held until morning otherwise.
- New
Delivery reports for every SMS, and a daily SMS limit per organisation.
- Improved
STOP replies are recognised from Swedish, Norwegian, Danish and Finnish numbers.
Ready for a million contacts
- Improved
Search, sorting, segments and saving are fast with over a million contacts.
- New
Nested condition groups, summarised in plain language.
- New
Tag colours you can change.
Get anywhere faster
- New
⌘K reaches every page, and search tells you which field matched.
- New
Icons for your object types, and choose the record an email preview uses.
- Improved
Imports and exports in one place, and one layout for every list.
Order lines in emails
- New
An Item rows block lists order lines, or any related records, with a total.
- New
An Order confirmation starter template.
The assistant can do everything you can
- New
The AI assistant can do anything you can do in the app, with your permissions, and asks you to confirm changes that matter.
- New
Over 50 more operations in the public API.
Flow diagrams and templates
- New
Edit flows as a diagram: steps as boxes, buttons as arrows.
- New
Seven ready-made flow templates.
- New
The assistant builds flows and sign-up forms for you.
An email builder anyone can use
- New
Start from a gallery of ready-made emails, then build with a block palette, a live canvas and a settings panel.
- New
Fields appear as named chips, and the preview fills them from a real contact.
- Improved
Marketing emails get an unsubscribe footer automatically.
Security and reliability
- Improved
Stronger protection throughout: email HTML is cleaned, and webhooks and outgoing connections can’t reach internal addresses.
- Improved
Saved views and settings in your browser belong to you and your organisation only.
- Improved
A campaign that can’t start tells you why, and other campaigns keep sending.
- Improved
SMS are counted per 160 characters, the way carriers count them.
Website tracking
- New
See what contacts do on your website on their timeline, installed with Google Tag Manager or a snippet.
- New
Google Analytics e-commerce events are picked up as they are, and earlier anonymous visits join the contact once they identify.
- New
A website abandoned-cart automation template.
A new look
- New
A new logo and brand across the app, the website and sign-in.
- New
AI assistant usage on the Usage page.
Developer docs and API reference
- New
Developer guides with code samples in cURL, Node and Python.
- New
A full API reference, generated from the live API so it is always current.
- New
A sign-in page in the app’s dark style.
AI assistant
Ask in plain words, and get answers, tables or the work itself done.
- New
A chat assistant that answers how-to questions, shows your data as tables and creates or changes records, segments, templates, campaigns and automations.
- New
Nothing is deleted or sent until you press Confirm.
- New
An “Ask AI” panel on every page (Ctrl/⌘+J).
A new automation builder and a fresh look
- New
Build automations on a canvas: wait for events, A/B test with automatic winners, goals, send schedules and message limits per contact.
- New
Start automations from templates, and follow live counts on every step.
- New
An organisation-wide limit on how many automated messages one contact gets.
- Improved
Segments, campaigns, flows and templates as cards, each with its own page.
Search everywhere, and a calmer workspace
- New
A search box on every list, and ⌘K to search everything at once.
- Improved
Home opens on what needs you today.
- Improved
Records laid out in two columns, lists that show the number that matters, and a timeline that reads as sentences.
- Improved
Follow-ups can be edited, and consent is shown in plain words.
Flows, sender addresses and a task inbox
- New
Flows: playbooks your team works by hand, with a board per flow, step statistics and ready-made flows in the Market.
- New
Sender addresses: shared and personal, each verified, with its own reply-to and signature.
- New
A follow-up inbox grouped by urgency, with snooze and outcomes.
- New
An action bar on every contact for email, calls, notes and follow-ups, with call logging.
- New
Conditions on what contacts did, and turning a search into a segment in one click.
- New
Exports run in the background and open cleanly in Excel.
Personal email and follow-ups
- New
Write an email from a contact’s page with rich text, sent as the company or as yourself.
- New
Follow-ups: tasks on any record, with a due date and an owner.
- New
Filter and sort lists by related records.
- New
Export a segment’s members to CSV.
The Market and smarter templates
- New
The Market: ready-made segments, automations (welcome series, review requests, shipping and refund notices, birthday, win-back, abandoned cart), templates and forms, installed in one click.
- New
Templates hub for email, SMS and RCS.
- New
Fields from related records (such as the latest order) in emails and automation conditions.
- New
Sign-up forms styled to match your site, with a live preview.
- Improved
More email providers work out of the box, including SMTP over SSL.
SMS, RCS, sign-up forms and analytics
- New
Campaigns by email, SMS or RCS, and SMS steps in automations.
- New
SMS consent and STOP handling.
- New
Embeddable sign-up forms with double opt-in and CAPTCHA.
- New
A visual email builder.
- New
Typed events and event-triggered automations, and automations that update related records, such as loyalty points from orders.
- New
An analytics dashboard with engagement and consent per channel.
Code FAB CRM is live
The CRM for e-commerce opens on crm.codefab.dev.
- New
Contacts, companies and your own objects, with segments and tags.
- New
Email campaigns with consent and unsubscribe built in, and automations.
- New
A REST API with API keys.
- New
Team invitations with two-factor sign-in.
- New
Usage and invoices in the app.